Branch 60°

Pressure class-compatible branches with equal and reduced branch sizes

The Reinert-Ritz branches for welding are charac­terised by their high-pressure resis­tance. Branches less than 45° and 60° enable high flexi­bility when integrating them into a piping system. This is further increased through directly available reducers at the branch, which also makes the fitting compact and light. Branches at other angles are available upon request.

Projektberichte

Your contact person for will be added automatically.

Tender text

PE100 branch

General preliminary remark

The fittings to be offered must be manufactured from material in compliance with the PE100+ Association and according to DIN EN 12201 with respect to dimensions, tolerances and quality requirements. Proof must be provided that they were manufactured on the basis of a quality assurance system in accordance with DIN EN ISO 9001. For all fittings a certificate in accordance with DIN EN 10204 must be submitted by the manufacturer.

Depending on its dimensions, the fitting must be manufactured either by injection moulding or from several components of homogeneously extruded semi-finished material in the turning and milling process and the wall thicknesses in areas where components of the main body are welded must be reinforced sufficiently to ensure the required strength and therefore high stability of the fitting. Semi-finished materials manufactured from wound rods or the subsequent application of other forms of reinforcing are not permitted.

The branch must be manufactured from PE100.

The pipe connections must be designed as a spigot in a shape sufficiently long for HE butt welding or HW welding and must have the same nominal diameter as the pipeline. The inner beads of the HE butt welding joint must be removed.

The branch pipe can be reduced and implemented optionally as a level invert taper.

Standards/guidelines

DIN EN 12201, DVS 2207, DVS 2210, DIN EN 10204, DIN EN ISO 9001, DIN EN ISO 50001

Permits/certificates

Acceptance test certificate 3.1 according to DIN EN ISO 10204 for the semi-finished material from the processed raw material with indication of MFR and OIT; only PE100 material in compliance with PE100+ Association

Manufacturer certified according to ISO 9001:2015 and ISO 50001:2011

Manufacturer:

Reinert-Ritz GmbH or equivalent

Performance specification:

PE100 branch …°, for … [medium] pipeline, pressure-class compatible, with long welding ends for installation in a pipeline with the dimension DN/OD ... SDR ... Nominal pressure level PN ...

Proof of delivery:

Reinert-Ritz GmbH

Ernst-Heinkel-Straße 2

48531 Nordhorn

Tel.: +49 5921 8347-0

Fax: +49 5921 8347-25

www.reinert-ritz.de

Email: [email protected]

read more

Downloads

Datasheet Branch 60°

Lagerung von Formteilen DE-EN

long-term storage of polyolefin fittings

Products DE-EN

Fittings DE-EN