Transition piece PE to cast iron
PE push-fit sleeve as a tension-proof transition to cast iron pipe
Reinert-Ritz has the right solution for the tension-proof transition of your PE-HD pipe to a cast pipe spigot end.
The long PE spigot enables welding into the PE-HD pipe using heating element butt welding and electrofusion welding.
The cast pipe spigot end is inserted into the socket body and securely sealed using an EPDM-Tyton® seal.
The integrated thrust-resisting device ensures that the cast iron pipe is firmly seated.
Technical data
Complete data sheet
Tender text
PE100 transition pipe connection PE/cast — longitudinal force-lockingGeneralpreliminary remark The fittings to be offered must be manufactured on the PE side from material in accordance with the PE100+ Association and comply with DIN EN 12201 with regard to dimensions, tolerances and quality requirements, and with DIN 28601 on the cast side. Proof of production on the basis of a quality assurance system in accordance with DIN EN ISO 9001 must be provided. A certificate in accordance with DIN EN 10204 must be provided by the manufacturer for all molded parts. Alternatively, the body of the molded part must be manufactured from a single piece of homogeneous semi-finished material using the injection molding process, even for more complex structures, in order to ensure the required reinforcement and thus high stability of the molded part. Semi-finished products made from coiled rod are not permitted.
The socket body must be fitted with a stainless steel outer reinforcement ring for force distribution and accommodate the screwed socket joint in accordance with DIN 28601.
Depending on the application, the sealing element must be made of EPDM or NBR in accordance with DIN EN 681.
The PE spigot end must be sufficiently long for HW welding.
Weiterlesen
Normen/Richtlinien
DIN EN 12201, DIN EN 681, DVS 2207, DVS 2210, DIN EN 10204, DIN EN ISO 9001, DIN EN ISO 50001, DVGW W 400–2, DVGW GW 335Zulassungen/Zertifikate
Abnahmeprüfzeugnis 3.1 nach DIN EN ISO 10204 am Halbzeug vom verarbeiteten Rohstoff mit Angabe von MFR und OIT; nur PE 100 Material gem. PE100+ Association
Hersteller zertifiziert nach ISO 9001:2015 und ISO 50001:2011
Hersteller:
Reinert-Ritz GmbH oder gleichwertigLeistungsbeschreibung:
PE 100 Übergangsrohrverbindung URV von PE auf Guss, längskraftschlüssig mit Schraubmuffenverbindung nach DIN 28601, PE-Spitzende nach DIN EN 12201 ausgelegt für eine HW-Schweißung, druckklassengerecht, schwarz,
PE-Seite: d … SDR …
Gussseite: DN …
Liefernachweis:
Reinert-Ritz GmbH
Ernst-Heinkel-Straße 2
48531 Nordhorn
Tel.: +49 5921 8347–0
Fax: +49 5921 8347–25
www.reinert-ritz.de
Email: contact@reinert-ritz.com
Downloads
Transition PE-cast data sheet
Transitions to other materials
RR product catalog
Molded parts in practice
