Cleaning wasteÂwater pressure pipes with the Quick-Pig pig launcher
Check, flush, vacuum and pig safely from the top edge of the site
Clean wasteÂwater pressure pipes safely and efficiently, as deposits and blockages impede the flow of wasteÂwater.For this reason, wasteÂwater pipes should be cleaned regularly.
Pigging is particÂuÂlarly effective for this with Quick Pig.
The Quick-Pig Station is a cleaning and inspection opening for pressure pipes that can be safely operated from the top of the ground.
With the Quick-Pig Station, you save yourself the need for a walk-in manhole and can maintain your pressure pipeline easily and safely.
Whether testing, flushing, suctioning or pigging, everyÂthing is done in no time at all. The station is installed in the penstock via the pipeline construction, also as a subseÂquent minimally invasive upgrade of a penstock.
With the Quick-Pig Station, your employees can safely test, flush, vacuum and pig a pressure pipe from the top of the ground.
This signifÂiÂcantly reduces the risk of injury and the time required for pigging.
Quick-Pig supports you in impleÂmenting the requireÂments of the self-inspection ordinance in a cost-effective manner and at the same time reduces the life cycle costs (manhole rehabilÂiÂtation) of the pipeline system.
Each Quick-Pig station is individÂually adapted to your needs so that you can efficiently clean your wasteÂwater pressure pipe in accorÂdance with your pipe system.
We will be happy to advise you, contact our Quick-Pig sales team directly!Have we piqued your interest?
Here you will find further interÂesting details and experience reports on Quick-Pig:
Tender text
PE100 pig trap Quick-PigGeneralprelimÂinary remarksThe molded parts to be offered must be made of material in accorÂdance with the PE100+ AssociÂation and comply with DIN EN 12201 with regard to dimenÂsions, tolerÂances and quality requireÂments. Proof of production on the basis of a quality assurance system in accorÂdance with DIN EN ISO 9001 must be provided. A certificate in accorÂdance with DIN EN 10204 must be provided by the manufacÂturer for all molded parts. The body of the molded part must be made from a single piece of homogeÂneous semi-finished product in order to ensure the required reinforcement and thus high stability of the molded part. Semi-finished products made from winding rod or other subseÂquently applied reinforceÂments are not permitted. The pig launching station must be made of PE100.
It must be designed in accorÂdance with the pressure class and consist of the housing with a form-fit pigging chamber (transÂmitter) of the same nominal diameter and the bayonet catch with O‑ring seal and stainless steel operating rods as well as a dome designed for the instalÂlation depth, which closes pressure-tight at the top with a dummy cover.
All materials used within the fitting must be made of corrosion-free material. The seal must be made of media-resistant material. The pipe connecÂtions must be designed as spigot ends in a suffiÂciently long form for HE butt welding or HW welding correÂsponding to the nominal width of the pipe to be pigged. The inner beads of the HE butt weld joint must be removed. Due to its design, the pig launcher can be installed underÂground in the pipeline without a manhole structure and can be operated from the top of the ground.
Standard manhole covers correÂsponding to the expected traffic load must still be taken into account as a separate item.
WeiterÂlesen
Optional/Zusätzlich erhältlich sind Bajonett-Verschlüsse mit Molchempfänger-Funktion. Beide Versionen des Bajonett-Verschlusses (Sender und Empfänger) müssen untereÂinander austauschbar sein und können optional auch mit Storz-Kupplung als SpülanÂschluss ausgeÂführt werden.Die RohranÂschlüsse können optional mit zugfesten SteckÂkupÂplungen REINOGRIP und/oder FlanschanÂschlüssen entsprechend der einzusetÂzenden Absperr-Armatur versehen werden. Die verwenÂdeten Flansche müssen aus korroÂsionsÂfreiem, faserverÂstärktem KunstÂstoff hergestellt sein. Bund und Flansch müssen an ihren VerbindungsÂflächen formschlüssig ineinander greifen, der Flansch den Bund zusätÂzlich von außen noch stützen, um einer Verformung entgeÂgenÂzuwirken. Dies bewirkt eine volle DruckÂbeÂlastÂbarkeit der Flanschverbindung entsprechend der Rohrdimensionierung.
Normen/Richtlinien
DIN EN 12201, DIN EN 1092–1, DIN 4124, DIN EN 1671, DWA‑A 116–2, DVS 2207, DVS 2210, DIN EN 10204, DIN EN ISO 9001, DIN EN ISO 50001Zulassungen/Zertifikate
AbnahÂmeprüfzeugnis 3.1 nach DIN EN ISO 10204 am Halbzeug vom verarÂbeiteten Rohstoff mit Angabe von MFR und OIT; nur PE100 Material gem. PE100+ Association
Hersteller zertiÂfiziert nach ISO 9001:2015 und ISO 50001:2011
Hersteller:
Reinert-Ritz GmbH oder gleichwertigLeistungsÂbeschreibung:
PE100 MolchÂschleuse QuickPig (Sender) für … [Medium]-Leitung, druckÂklasÂsenÂgerecht, für schachtÂfreien, erdverÂlegten Einbau in eine Leitung aus … [PE/PVC/…] der Dimension DN/OD … x … mm SDR …
Ausführung
- mit SpülanÂschluss â–¡ 2“
- 4“ (ab d 200 mm)
Inklusive Zubehör:
- Bajonett-Verschluss als Molchempfänger
- Bajonett-Verschluss als Molchempfänger mit SpülanÂschluss â–¡ 2“
- 4“ (ab d 200 mm)
- Press-Hebel
Anschlüsse
Eingang:
- PE100 Rohrstutzen d … SDR …, Länge … mm
- Flansch DN … d … SDR … PN …
- zugfeste SteckÂkupÂplung d …
Ausgang:
- PE100 Rohrstutzen d … SDR …, Länge … mm
- Flansch DN … d … SDR … PN …
- zugfeste SteckÂkupÂplung d …
[Gesamtlänge:… mm]
Rohrdeckung:… mm
BetriebÂsÂdruck:… bar
LieferÂnachweis:
Reinert-Ritz GmbH
Ernst-Heinkel-Straße 2
48531 Nordhorn
Tel.: +49 5921 8347–0
Fax: +49 5921 8347–25
www.reinert-ritz.de
Email: contact@reinert-ritz.com













